Installation Instructions

To ensure proper functioning of your Cordaway safety unit, please follow the instructions below during installation

Tools Required
• Drill
• Level
• Pencil
• Phillip's head screwdriver
• Tape measure
Tools required - Drill, Spirit Level Tools required - Pencil, Phillips Head Screwdriver, Tape Measure
1
Blind Cord Safety Device installation instructions diagram

Locate base plate on side of window with blind cords.

Bottom of the base plate should be mounted 1600mm above floor level to meet ACCC standards.

accc.gov.au/publications/corded-internal-window-coverings

2
Blind Cord Safety Device installation instructions diagram

Using screws supplied, fix off base plate to timber architrave in a level position.

Nb. Base plate can be used either way up.

[If you have to fix the base plate to a different material we recommend you use a tradesman/ handyman.]

3
Blind Cord Safety Device installation instructions diagram

Guide the cord to the base plate on the locating lug at the top and wind the cord on.

4
Blind Cord Safety Device installation instructions diagram

Ensure nods hang inside, not below the unit.

5
Blind Cord Safety Device installation instructions diagram

Clip your Cordaway cover plate on.

6
Blind Cord Safety Device installation instructions diagram

To remove the cover plate, pull from either the top or bottom.